https://turingpi.com logo
Thanks again for the detailed report. v2.45.0 is o...
# │firmware-dev
o
Thanks again for the detailed report. v2.45.0 is out (https://turingpi.xyz/news/v2.45.0/). The daemon assumed the bridge is always called br0, so your br-wan/br-lan split broke the dashboard IP and every change failed with a bare 500. Now: - the IP shows on any layout, and the Network page lists every interface with its address; - a board without br0 gets a clear explanation instead of a 500 (the page manages
br0
only, so for a split layout edit
/etc/network/interfaces
over SSH); - a hand-written file is only replaced if you explicitly confirm, and the old one is kept as /etc/network/interfaces.hand-written.; - the red banner says when and why, and goes away; - restoring the file by hand is noticed without a reboot. One thing that's not there yet: with split bridges the BMC won't answer mDNS (.local), because that's still bound to br0. That's a separate fix I'll do next. If you go back to your split layout on 2.45, I'd love to hear whether the page now says something sensible.