https://turingpi.com logo
Not that one, sorry. #65 turned out to be unsafe o...
# │firmware-dev
o
Not that one, sorry. #65 turned out to be unsafe on a 2.4: it leaves the node power pins as inputs, so after a BMC reboot that drops the rails, bmcd can't switch your nodes back on. I'm closing it. What would actually help is a 2.4 owner running a 5-minute check on the current firmware (v2.46.1). It tells me whether the board holds the node power while the BMC is in reset, and that decides whether the real fix is worth building. If you're up for it, I'll write up the exact commands.