so I'm curious, the "switch" on the TuringPi is a 1G switch, however if you manage to LACP the two interfaces, could you effectively get 1G+ of traffic if multiple nodes were outbound? This is of interest as I'm currently doing an external NAS (48TB) that is of course limited by the current 1G switching. Additionally I could then set up rate limiting on one VLAN for access to the NAS and a lower rate limit on my "North-South" facing vlan for connecting with the public. IE, some level of improvement on my "East-West" traffic (for lack of a better description) with the North-South then being rate limited. Access to the NAS and data store/S3 storage needs as much bandwidth as I can give it whereas the North-South access can be limited.
Currently I'm hooking up both interfaces to an Arista 7050TX EOS switch so I have lots of options on the configuration side (my NAS is a 10G interface and of course the TuringPi is only 1G+1G). Currently I'm splitting vlans so I have 1G for N/S and 1G for E/W. With LACP (if it works) I could allocate more like .4G N/S and 1.6G E/W.