https://turingpi.com logo
Thanks, that's a real bug on my side, actually thr...
# │firmware-dev
o
Thanks, that's a real bug on my side, actually three of them: Building the release list takes about 3 minutes on the BMC's CPU, and the page stops waiting after 2 minutes. That's why it sits on "checking the sources now" with v2.46.1 missing. With no SD card, every check counts as failed, so the board never keeps the result and starts over every 2 minutes. "Upload .tpu" only ever saves the image to the SD card. Without a card it fails, and the error is a toast that's easy to miss. Fixes are in progress for the next release. To get to v2.46.1 today, either: - leave the Firmware page open for about 4 minutes, reload, and v2.46.1 should be in the list with an Install button; or - over SSH on the BMC:
tpi-selfupdate --tag v2.46.1 --reboot
. It downloads, checks the checksum, stages it and reboots. If the new version doesn't come up healthy, it rolls back by itself. If yours is a 2.4 board, the BMC reboot will power-cycle your nodes, so pick your moment. On a 2.5 they keep running. "Rollback: version not readable" is harmless. The rollback image is there; the board just has no record of its version number. It fills in at the next update.e