https://turingpi.com logo
#│forum
Cannot boot Turing Pi v2
# │forum
b

blackrose6478

02/23/2023, 6:55 PM
Hi guys, for some weeks my turing pi arrived but it will not boot. As a PSU I use the beQuiet! Dark Power Pro 650W and as Node 1 a RPi 4. When is switch on the PSU then a green LED turns on near the ATX-Connector and a orange LED blinks at node 1. And that's it. When I press the power button of my case then nothing happens. I cannot find any help in the documentation. Could anybody help me? Thanks in advance 🙂
b

BADMAN152

02/23/2023, 7:11 PM
Didi you Press and hold the Button on the tp2?
Or use the Webinterface If you connected a Network cable
b

blackrose6478

02/23/2023, 7:13 PM
the turing pi does not boot and I cannot see the board in my fritzbox... which buttons should I press (and at the same time and how long)?
b

BADMAN152

02/23/2023, 7:15 PM
The Button in the Board ist labeled as "key 1". Press and hold for 1sec
Didi you Insert a rtc Batterie?
b

blackrose6478

02/23/2023, 7:16 PM
Magic is happening... thank you...
Yeah... I had a battery in
b

BADMAN152

02/23/2023, 7:17 PM
You could also Press and hold the Power Button of your Case.
So you have already the Battery fix?
b

blackrose6478

02/23/2023, 7:17 PM
Ok... I will test it later... Thank you
no
b

BADMAN152

02/23/2023, 7:19 PM
The Battery can lead to BMC Problems. If you discover any issues remove the Battery
b

blackrose6478

02/23/2023, 7:19 PM
ok... thank you for your help 🙂
[Solved]
2 Views